Wheel Studs 12mm 1.50 RH 1.75"

Fitment and specs

• Thread size: 12 mm x 1.50 (12x1.5)
• Thread direction: right-hand (RH)
• Overall length: 1.75 inches

Confirm fit before installing: this stud carries a 12x1.5 right-hand thread and measures 1.75 inches end to end, so both numbers should match the stud you pulled out. Once the wheel is mounted, bring the lug nuts up to spec with our torque reference chart, then re-check torque after 50 to 100 miles.

Common questions

Will my existing 12x1.5 lug nuts thread onto this stud?
Yes. Any 12x1.5 lug nut fits a 12x1.5 stud. Just verify the pitch on your current hardware first, since 12 mm studs come in more than one pitch and they are not interchangeable.

Should I match the original length or go longer?
Match the original. If your old stud measures 1.75 inches overall, this is the direct swap. Go longer only when you know the extra thread clears your wheel and works with your lug nut style.